Even if you are using one of the best models of Wireless-N repeaters, coming across technical issues is very common. This is because the repeater is a networking device after all. Many users have complained recently that their Wireless-N wireless repeaters are not working even after a successful WiFi repeater setup. In case, you are standing in the queue, then this is the post for you. Here, you will find the top four fixes through which you can make your networking device work within minutes.
But, before we tell you how to make your extender up and running again, you should become familiar with the reasons why it is not working. Taking this into account, continue reading this post.
Why is Wireless-N Repeater Not Working?
- The very first reason why your device is not working is because it is because is not getting proper power supply.
- Another reason could be that the Ethernet cable connecting the repeater to the host router is damaged.
- The firmware of your networking device is running on its outdated version or it is corrupted.
- Last, but not least, technical glitches can also stop your wireless range extender from working properly.
How to Fix Wireless-N Repeater Not Working Issue?
- Update the Firmware Immediately
Check if your Wireless-N repeater is working on its updated firmware version or not. In case, it is not, then you need to update it right away. Now, you might be wondering how to update the firmware of the networking device, right?
Well, the answer to the question is quite simple, i.e. refer to the instructions that are given in the user manual of your networking device. Along with the firmware update steps, you will also find the steps to log in to your device in there.
- Purchase a New Ethernet Cable
Another reason why you are experiencing the Wireless-N repeater not working issue is because the Ethernet cable currently in use is damaged, as mentioned above. In this case, it is recommended that you use a new Ethernet cable to connect the devices.
While using the new Ethernet cable, you need to keep certain things in mind. They are as follows:
- Ensure that the newly established connection is not loose
- There should not be too much distance between the devices.
If you are not interested in buying a new cable and building a new connection between the extender and the host router, then take our advice and connect the networking devices using a wireless source of connection.
- Call Up an Experienced Technician
In case you are not able to make your Wireless-N repeater up and running, then you should check the wall socket that is supplying power to your networking device. Is it damaged? Yes? Well then, this means that your repeater is not getting proper power.
In this situation, you need to call up an electrician and ask him to come to your home. Once he does, get him to fix the socket. Hopefully, this troubleshooting hack will help you to fix the issue at hand, in case, it does not, keep reading.
- Power Cycle All the Devices
Considering none of the aforementioned hacks helped you out, you should not wait any more to power cycle your network. Power cycling the network means, you need to restart the repeater, the router, and even the computer.
After restarting the devices, see if you are able to get rid of the repeater not working issue. Is it still troubling you? Well, your last resort is to reset your networking device. After the process finishes, perform Wireless-N WiFi repeater setup.
For your information, there are two different ways in which you can install your networking device. The first method is the WPS method and the second method is the Manual method. You find the guidelines to execute both of them in the user manual.
As mentioned before, troubleshooting the Wireless-N repeater not working issue is quite difficult. But, we hope that now that you have followed the hacks given above, you will be able to say opposite of this statement. If you do, share a few words of appreciation with your fellow readers.